A PROGRAMMABLE LOGIC CONTROLLER PLC SIMATIC MANAGER by Siemens is an industrial computer control system that continuously monitors the state of input devices and makes decisions based upon a custom program to control the state of output devices.
Almost any production line, machine function, or process can be greatly enhanced using this type of control system. However, the biggest benefit in using a PLC is the ability to change and replicate the operation or process while collecting and communicating vital information.
Another advantage of a PLC system is that it is modular. That is, you can mix and match the types of Input and Output devices to best suit your application.
The first Programmable Logic Controllers were designed and developed by Modicon as a relay re-placer for GM and Landis.
- These controllers eliminated the need for rewiring and adding additional hardware for each new configuration of logic.
- The new system drastically increased the functionality of the controls while reducing the cabinet space that housed the logic.
- The first PLC, model 084, was invented by Dick Morley in 1969
- The first commercial successful PLC, the 184, was introduced in 1973 and was designed by Michael Greenberg.
What Is Inside A PLC?
The Central Processing Unit, the CPU, contains an internal program that tells the PLC how to perform the following functions:
Execute the Control Instructions contained in the User’s Programs. This program is stored in “nonvolatile” memory, meaning that the program will not be lost if power is removed
Communicate with other devices, which can include I/O Devices, Programming Devices, Networks, and even other PLCs.
Perform Housekeeping activities such as Communications, Internal Diagnostics, etc.
How Does A PLC Operate?
There are four basic steps in the operation of all PLCs; Input Scan, Program Scan, Output Scan, and Housekeeping. These steps continually take place in a repeating loop.
Four Steps In The PLC Operations
- Input Scan
Detects the state of all input devices that are connected to the PLC
- Program Scan
Executes the user created program logic
- Output Scan
Energizes or de-energize all output devices that are connected to the PLC.
This step includes communications with programming terminals,
internal diagnostics, etc…
What Programming Language Is Used To Program A PLC?
While Ladder Logic is the most commonly used PLC programming language, it is not the only one. The following table lists of some of languages that are used to program a PLC.
Ladder Diagram (LD) Traditional ladder logic is graphical programming language. Initially programmed with simple contacts that simulated the opening and closing of relays, Ladder Logic programming has been expanded to include such functions as counters, timers, shift registers, and math operations.
Function Block Diagram (FBD) – A graphical language for depicting signal and data flows through re-usable function blocks. FBD is very useful for expressing the interconnection of control system algorithms and logic.
|Structured Text (ST) – A high level text language that encourages structured programming. It has a language structure (syntax) that strongly resembles PASCAL and supports a wide range of standard functions and operators. For example;
|Instruction List (IL): A low level “assembler like” language that is based on similar instructions list languages found in a wide range of today’s PLCs.
|Sequential Function Chart (SFC) A method of programming complex control systems at a more highly structured level. A SFC program is an overview of the control system, in which the basic building blocks are entire program files. Each program file is created using one of the other types of programming languages. The SFC approach coordinates large, complicated programming tasks into smaller, more manageable tasks.|